The increased capacity offered by the packer door allows for efficient picking of small patches and yet builds the module in the right place. Mother nature knows ways to waste good cotton from modules being built in the wrong places. When moving to a new harvest field , your picker isn't sitting with a full load, waiting on the builder to finish and get moved to the new field. Dump into a Boll Buggy® and get back to picking. You can't afford to waste time.

Conveyor Chain with Extension Chute
The patented extension chute will deliver cotton to the middle and far side of the module. Plus the chute folds down into the basket of the Boll Buggy® and reduces the overall transport height of the unit.

Gravity Flow With or Without Drum Regulator
The regulator is powered by an independently controlled, reversible, hydraulic motor which allows forward and reverse operations of the regulator, practically eliminating spills. Flowing cotton over the regulator will throw cotton to the far side of the builder; flowing cotton under the regulator will flow cotton to the near side. Even distribution of cotton in the module builder builds tighter and more dense modules with more cotton per module. These modules will resist weather damage and won't break apart when moving.

Your picker/stripper has a packing device, why not your Boll Buggy®?
The patented packer/divider panel performs two important functions. First, it compresses the initial dumps to 2/3 of their original size, increasing the overall capacity of the Boll Buggy® by as much as 33 percent. Second, it divides the buggy load into two parts and while dumping, holds half of the load in the top part of the buggy, avoiding flooding conveyor or regulator with too much cotton at one time. This allows the conveyor or regulator to smoothly and accurately meter the cotton into a module builder or trailer. This makes topping off a snap.

Packer/divider door not only packs, but moves the cotton over from the dump inside, to the dump outside, where your picker can't reach. This is another increase in the overall capacity of the Boll Buggy®. Using the packer/divider door allows the dumping of two average sized four row dumps.